Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
The milling cutter mills the edge of the panel into a inclined edge,
Adjustable tilt angle,
The hypotenuse is formed at a time.
Configure two 2.2KW motors,
It consists of two milling cutters before and after,
Maximum pre-milling height 40mm (optional 65mm),
Corrugation and expansion edge of milled panel surface,
Make the edge band and the panel fit more closely,
Integrity and aesthetics are better.
Melt the glue after high temperature
Coated on the inclined side of the panel,
Perfectly fit the shape of the hypotenuse,
Even glue application guarantees the fit effect.
According to the preset angle,
Bend the tape,
Facilitate the subsequent welt process
tape can better fit the panel
Melt the glue after high temperature
Apply to the straight side of the panel
Even glue application guarantees the fit effect.
Tape bonded to the panel
Pressurized by 4 straight pressing wheels,
Make the panel and tape fit more firmly
Pressing through 4 oblique pressing wheels and 2 straight pressing wheels,
Make the panel and tape more firmly.
Automatic disc tracking
High-frequency high-speed motor structure,
Trimming the tape bonded to the oblique edges of the panel,
Repair the excess tape,
Make it milled into an edge with R arc.
Through precise linear guide motion,
Adopting automatic tracking of the master and high-speed high-speed motor cutting structure,
Edge band protruding from the front of the panel
Trimming with the edge bands protruding from the back of the panel,
Make it flush with the front and back of the panel,
Ensure that the cut surface is smooth
Adopt large and small disc automatic tracking
High-frequency high-speed motor structure,
Trimming the edge bands with straight edges bonded,
Repair and process the excess edge banding material on the upper and lower edges of the panel
Make it milled into an edge with R arc.
Adopt profile wheel rounding device for left and right movable profile,
Mill the four corners of the edge banding strip bonded to the panel into an R arc shape,
Make the 4 corners of the panel more smooth and beautiful.
Scrapping knife on both sides of the panel
Scrape the wavy knife marks on the tape due to rotation,
The modified R angle is the same size as the refined R angle,
Make the upper and lower parts of the panel more smooth and neat.
Remove the remaining glue extruded from the joints of the upper and lower planes of the edge banding on the panel, so that it is not easy to stick to the buffing wheel and reduce the frequency of buffing wheel replacement
The release part sprays the release agent on the plane ,
Prevent excess glue from splashing on the panel surface and causing difficulty in cleaning;
The cleaning part sprays the cleaning agent on the plane,
Make cleaning up easier.
Remove the remaining glue more easy and convenience
Min. Panel length&width | ≥160mm |
Inclined panel thickness | 15-25mm |
Straight panel thickness | 10-60mm |
Straight Tape thickness | 0.4-3.0mm |
Inclined tap thickness | 0.4-1.5mm |
Weight | 4100kg |
Inclined degree | 45 degree(unadjustable) |
Inclined feed speed | 15m/min |
Straight feed speed | 18m/min |
Total power | 31.3kw |
Working pressure | 0.65mpa |
Overall size | 9300*900*1600mm |
Automatic edge banding machine, meet various edge banding needs, the necessary machine for furniture, saving time, labor cost.
*We respect your confidentiality and all information are protected.
Copyright © 2022, HUAHUA. All rights reserved. Terms of Service and Privacy Policy.
*We respect your confidentiality and all information are protected.
Thank you for your message, we will reply to your message as soon as possible.
*We respect your confidentiality and all information are protected.